TitanG Posted May 15, 2019 Share Posted May 15, 2019 7 minutes ago, SaveByRichter35 said: What is the layup of these masks? Full fiberglass, fiberglass with aramid(Kevlar) reinforcements, fiberglass with aramid layers, full aramid, is it using Sportmask's innegra? Didn't specify as far as I can see. You'd probably have to contact GolieParts to find out. Quote Link to comment Share on other sites More sharing options...
MangoRhinehart Posted May 15, 2019 Share Posted May 15, 2019 45 minutes ago, SaveByRichter35 said: What is the layup of these masks? Full fiberglass, fiberglass with aramid(Kevlar) reinforcements, fiberglass with aramid layers, full aramid, is it using Sportmask's innegra? According to Dennis who runs goalieparts.com and is in the process of getting his mask made right now. 18 layers of 10oz woven fiberglass mat Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted May 15, 2019 Share Posted May 15, 2019 22 minutes ago, MangoRhinehart said: According to Dennis who runs goalieparts.com and is in the process of getting his mask made right now. 18 layers of 10oz woven fiberglass mat Yea, I had another source tell me all fiberglass as well. As much as I would absolutely LOVE my very own custom molded Harrison mask, which is my all time favorite mask, for $1,800 I will stick to my custom padded all Kevlar Protechsport Harrison mold. Oh well. I will submit for the raffle though. Quote Link to comment Share on other sites More sharing options...
MangoRhinehart Posted May 15, 2019 Share Posted May 15, 2019 Some pictures from Dennis' build for folks not on the facespace. 4 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted May 15, 2019 Share Posted May 15, 2019 Absolutely beautiful!! Quote Link to comment Share on other sites More sharing options...
Naz Posted May 15, 2019 Share Posted May 15, 2019 1 hour ago, MangoRhinehart said: Some pictures from Dennis' build for folks not on the facespace. Gawd that is beautiful. THAT is what a mask should be shaped like, triangle vents and all. 1 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted May 15, 2019 Share Posted May 15, 2019 15 hours ago, Naz said: Gawd that is beautiful. THAT is what a mask should be shaped like, triangle vents and all. Agreed. I am a sucker for that classic mask look/shape. Nas, idk if you remember or not, but I mentioned back when I got my Protechsport mask that something looked off about it. I did a side by side of this picture and a picture of my mask. They're actually not very far off from each other. I think the biggest reason it appeared to be off was because of how long my chin drop was. You don't really see many of these masks with a big chin drop. Other than that, the vents on my mask are slightly smaller. 1 Quote Link to comment Share on other sites More sharing options...
TitanG Posted May 16, 2019 Share Posted May 16, 2019 If only I had $1800 USD to drop.... Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted May 16, 2019 Share Posted May 16, 2019 Seriously Quote Link to comment Share on other sites More sharing options...
JoshAbrams Posted May 31, 2019 Share Posted May 31, 2019 I got a couple updates today... Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted May 31, 2019 Share Posted May 31, 2019 6 hours ago, JoshAbrams said: I got a couple updates today... Fuck I want one of these so damn bad. Josh please post any progress pictures you receive. PLEASE. Quote Link to comment Share on other sites More sharing options...
Joe Messina Posted May 31, 2019 Share Posted May 31, 2019 Iconic - Bob Essensa (1993) 1 Quote Link to comment Share on other sites More sharing options...
JoshAbrams Posted May 31, 2019 Share Posted May 31, 2019 4 hours ago, SaveByRichter35 said: Fuck I want one of these so damn bad. Josh please post any progress pictures you receive. PLEASE. WILL DO! 1 Quote Link to comment Share on other sites More sharing options...
Wonder35 Posted June 1, 2019 Share Posted June 1, 2019 It brings back so many memories to see these latest Harrisons in their incubation period. Some of you may be delighted to hear that I returned to the nets late this past season, new knee performing well at age 69. Others of you, including the chap on this board who offered me $450 for my Harrison, (he wanted to repaint it into a more modern design) are SOL as I plan on keeping my mask forever. Or at least until it gets passed along to my grandson. 1 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted June 1, 2019 Share Posted June 1, 2019 2 hours ago, Wonder35 said: It brings back so many memories to see these latest Harrisons in their incubation period. Some of you may be delighted to hear that I returned to the nets late this past season, new knee performing well at age 69. Others of you, including the chap on this board who offered me $450 for my Harrison, (he wanted to repaint it into a more modern design) are SOL as I plan on keeping my mask forever. Or at least until it gets passed along to my grandson. You're my hero lol 1 Quote Link to comment Share on other sites More sharing options...
Snowman30 Posted June 1, 2019 Share Posted June 1, 2019 On 5/31/2019 at 7:56 AM, Joe Messina said: Iconic - Bob Essensa (1993) If I was to get a Harrison it would be a toss up between this design and Potvin one. Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted June 1, 2019 Share Posted June 1, 2019 2 minutes ago, Snowman30 said: If I was to get a Harrison it would be a toss up between this design and Potvin one. Do you mean if you were to get a Harrison painted? Quote Link to comment Share on other sites More sharing options...
Snowman30 Posted June 1, 2019 Share Posted June 1, 2019 1 hour ago, SaveByRichter35 said: Do you mean if you were to get a Harrison painted? Sorry yeah if was to get one of those masks. I would get ether the Essensa design or Potvin design on it. Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted June 1, 2019 Share Posted June 1, 2019 14 minutes ago, Snowman30 said: Sorry yeah if was to get one of those masks. I would get ether the Essensa design or Potvin design on it. Wasn't sure if you meant there were slight differences in the shell. Thanks for clarifying. Quote Link to comment Share on other sites More sharing options...
Wonder35 Posted June 2, 2019 Share Posted June 2, 2019 On 5/15/2019 at 1:00 PM, MangoRhinehart said: According to Dennis who runs goalieparts.com and is in the process of getting his mask made right now. 18 layers of 10oz woven fiberglass mat My fading memory recalls Greg saying that he added pieces of Kevlar to high contact areas, chin and forehead. Would this make sense for masks such as mine made in the mid 1980's? Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted June 2, 2019 Share Posted June 2, 2019 1 hour ago, Wonder35 said: My fading memory recalls Greg saying that he added pieces of Kevlar to high contact areas, chin and forehead. Would this make sense for masks such as mine made in the mid 1980's? Do you recall how many layers of Kevlar? Quote Link to comment Share on other sites More sharing options...
WillyGrips13 Posted June 2, 2019 Share Posted June 2, 2019 On 6/1/2019 at 9:56 AM, Wonder35 said: It brings back so many memories to see these latest Harrisons in their incubation period. Some of you may be delighted to hear that I returned to the nets late this past season, new knee performing well at age 69. Others of you, including the chap on this board who offered me $450 for my Harrison, (he wanted to repaint it into a more modern design) are SOL as I plan on keeping my mask forever. Or at least until it gets passed along to my grandson. Great news. Hope to see more pics of you playing and your gear. Are you still wearing the John Brown gear? Quote Link to comment Share on other sites More sharing options...
Wonder35 Posted June 2, 2019 Share Posted June 2, 2019 37 minutes ago, SaveByRichter35 said: Do you recall how many layers of Kevlar? It wasn't many but I can't say for certain. My guess would be a single sheet. Quote Link to comment Share on other sites More sharing options...
Wonder35 Posted June 2, 2019 Share Posted June 2, 2019 (edited) 1 hour ago, WillyGrips13 said: Great news. Hope to see more pics of you playing and your gear. Are you still wearing the John Brown gear? I sold my entire set of BROWN gear to one person following knee replacement surgery a year ago. Included were my Model 2000CA, 2100 Series Pads, JB2200 Gloves and JB2000 Pants. Back around 2010 Scott Battram built me a set of all leather pads and gloves. That's what I'm wearing now. Is it sacrilegious to display Battram gear on a BROWN thread? Edited June 2, 2019 by Wonder35 2 Quote Link to comment Share on other sites More sharing options...
aircanuck Posted June 2, 2019 Share Posted June 2, 2019 (edited) 1 hour ago, Wonder35 said: I sold my entire set of BROWN gear to one person following knee replacement surgery a year ago. Included were my Model 2000CA, 2100 Series Pads, JB2200 Gloves and JB2000 Pants. Back around 2010 Scott Battram built me a set of all leather pads and gloves. That's what I'm wearing now. Is it sacrilegious to display Battram gear on a BROWN thread? Sacrilege or not...That looks sooooooooooo sharp. Edited June 2, 2019 by aircanuck 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.